DIRECTV RC73 IR/RF Remote Control
The newest remote from DIRECTV, the RC73 has an all-new design re-engineered to give you faster access to the functions you need. This remote fits your hand well and simplifies operation. The RC73 will also control your TV and/or receiver for the volume and power functions, once you've told the...
Ahora mismo hay +41 personas viendo este producto.
The newest remote from DIRECTV, the RC73 has an all-new design re-engineered to give you faster access to the functions you need. This remote fits your hand well and simplifies operation. The RC73 will also control your TV and/or receiver for the volume and power functions, once you've told the remote what model components you have. When used in RF mode, this remote is faster and more accurate due to the RF4CE protocol. This two-way protocol confirms each button press, so no missed digits in three-digit channels! In IR mode, this remote is compatible with all legacy and current DIRECTV receivers. In RF mode, this remote will only work with the DIRECTV HR44 Genie and the Genie clients C41 and C41W. (When in RF mode, it will still use IR for TV/AV functions.) Compatible with older DIRECTV receivers when in IR mode On-screen tips help you use the buttons effectively Can be programmed to control RVU TVs 2014 or newer Toshiba DIRECTV-ready TVs require this remote Works with all DIRECT-ready (RVU) televisions All new combined pause/play button All new design puts the most frequently used buttons in easy reach Volume and channel rockers move easily with a push of the thumb Easy battery life indicator - Solid green=OK, fast green=replace soon, slow green=replace now Self-programming when used with a DIRECTV Genie DVR or client RF4CE 2-way technology for better RF signal reception with less key bounce Turn TV and receiver on with one button Press and hold {ENTER} to change TV input
- This Auction is for brand new in factory plastic bag with room stickers and batteries
- Depending on the availability you will receive remote controls with either Direc TV or AT and T logos. You can check out both types of remotes on the pictures. Besides the logos that are located on the top and the bottom of the remote these are identical.
- The RC66RX Remote control will work on these direc TV receivers: H20, H21, H22, H23, H24, H25, HR20, HR21, HR22, HR23, HR24, HR34, R15, R16, R22 and D12, D11 and D10
- The RC66RX replaces the following models: RC-16, RC-23, RC-32, RC-64, RC-65, RC-66, RC66X, RC64R, RC65R and RC65RX
- Remote operates on IR and RF Frequencies
- RF capable universal remote, for control from anywhere in the house when used with RF compatible receiver
- Memory protection to secure against re-programming during battery replacement
- This Remote can be programmed to operate 3 additional devices such as TV, DVD, CD and Audio with the latest codes for all supported devices.
- When switching the IR/RF mode of the receiver, it displays onscreen instructions for also switching the mode of the remote control. Those instructions are reproduced here.
To put the remote control into RF mode:
- Press and hold mute and select, wait for two blinks, release
- Enter 9 6 1
- Press Chan up
- Enter last 6 digits of the Receiver ID number, found on a sticker in the access card compartment
- Press Select
- Compatible with all Sanyo LED, LCD TVs except the ones with Roku built-in.
Â
